氟迪提供哪種氟橡膠?

氟迪已經致力于氟彈性體合成21年。工廠占地面積20000平方米,有三條現代化生產線、8套班伯里機、15套測試設備。為了保證每批訂單都是完全合格的,我們有標準的生產加工,嚴格的質量控制體系和獨特的復合配方。該產品年產量為1000噸氟聚合物,并通過了ISO9001、REG/SGS認證。

我們提供了廣泛的氟彈性體,包括雙酚固化共聚物,雙酚固化共聚物,過氧化物固化共聚物,過氧化物固化共聚物,高氟含FKM(70%),FPEM,耐低溫FKM,全氟彈性體FFFKM,FKM原膠,FKM預混物,FKM復合物,FKM化合物。

如何選擇適合您的應用的氟彈性體?
如我們所知,有維坦A,B,nh,GLT等級氟彈性體。維頓A是66%氟含雙酚固化共聚物,主要使用。它在大多數情況下使用,如汽車油封,軸密封,O環,墊圈,墊圈。維頓B是68%含氟的雙酚固化三元聚合物。具有較高的氟容器,其耐化學性優于維頓A。它用于惡劣的環境中,無法滿足要求。含氟量較B級高,含氟量約69-70%。它具有優異的抗化學性能.但是我們知道,氟含量越高,低溫抵抗力就越差。因此,對于工作環境來說,有一個特殊等級的GLT等級,要求低溫。一般只能在10℃的溫度下,低溫等級為-20~-30℃.如果您需要低溫度的-40℃的氟硅樹脂是一個不錯的選擇。氟橡膠耐酸性好,耐堿性差。如果您需要耐堿氟彈性體,我們強烈建議Fepm,它具有良好的耐堿性和耐蒸汽性。

我們的技術員和銷售團隊對各種氟造口器有很好的了解。我們相信我們會為您提供最優惠的優質產品。

Which fluoroelastomer FUDI provide?

FUDI has been devoted itself in fluoroelasetomer compounding for 21 years. The factory covers an area of 20000 square meters with three modern production lines, 8 sets of banbury machine, 15 sets of testing equipment. To ensure every batch of order is fully qualified, we have standard production processing, strict quality control system along with unique compounding formulations. With annual output of 1000 tons of fluoropolymer, the products passed ISO 9001, Reach/ SGS certificates.

We provide a wide range of fluoroelastomers including bisphenol curable copolymer, bisphenol curable terpolymer, peroxide curable copolymer, peroxide curable terpolymer, high-fluorine contained fkm (70%), FEPM, low temperature resistance fkm, perfluoroelastomer ffkm, fkm raw gum, fkm precompound, fkm compound ready for use.

How to select which fluoroelastomer suitable for your application?
As we know, there are viton A, B, GF, GLT grades fluoroelatomer. Viton A is 66% fluorine contained bisphenol curable copolymer, which is used mostly. It is used in most situations like automotive oil seals, shaft seals, o rings, washers, gaskets. Viton B is 68% fluorine contained bisphenol curable terpolymer. With higher fluorine container, the chemical resistance is better than Viton A. It is used in harsh environment which Viton A can’t meet requests. GF grade is higher fluorine contained than B grade, the fluorine content about 69-70%. It has outstanding performance in chemical resistance. But as we know the higher fluorine the worse low temperature resistance it has. So there is a special grade GLT grade for the working environment which low temperature is requested. Usually viton A can only stand temperature -10℃, while low temperature grade can stand for -20 to -30℃. If you need lower temperature like -40℃ fluorosilicone is a good choice. Fluoroelatomer has good resistance to acid, while it has poor resistance to alkali. If you need alkali resistance fluoroelastomer, we highly suggest FEPM, It has good resistance to alkali and steam.

Our technician and sales team has a good knowledge of various fluoroelstomer. We are sure we will provide you the good quality products with best offer.